Switch: Port 3 is connected to the router and the p
ackets are transmitted in VLAN3; port 4 is
connected to user A and the packets are transmitted in VLAN4; port 5 is connected to user B and
the packets are transmitted in VLAN5.
User A: Connected to Port 4 of the switch.
User B: Connected to port 5 of the switch.
Configure a multicast VLAN, and user A and B receive multicast streams through the multicast
VLAN.
" Pgvyqtm"Fkcitco"
" Eqphkiwtcvkqp"Rtqegfwtg"
Uvgr" Qrgtcvkqp" Fguetkrvkqp"
1 Create VLANs Create three VLANs with the VLAN ID 3, 4 and 5 respectively,
and specify the description of VLAN3 as Multicast VLAN on
XNCP→:2403S"XNCP page.
2 Configure ports On XNCP→:2403S"XNCP function pages.
For port 3, configure its link type as GENERAL and its egress rule
as TAG, and add it to VLAN3, VLAN4 and VLAN5.
For port 4, configure its link type as GENERAL and its egress rule
as UNTAG, and add it to VLAN3 and VLAN 4.
For port 5, configure its link type as GENERAL and its egress rule
as UNTAG, and add it to VLAN3 and VLAN 5.
3 Enable IGMP
Snooping function
Enable IGMP Snooping function globally on Ownvkecuv→KIOR"
Upqqrkpi→Upqqrkpi" Eqphki" page. Enable IGMP Snooping
function for port 3, port4 and port 5 on Ownvkecuv→KIOR"
Upqqrkpi→Rqtv"Eqphki"page.
4 Enable Multicast
VLAN
Enable Multicast VLAN, configure the VLAN ID of a multicast
VLAN as 3 and keep the other parameters as default on
Ownvkecuv→KIOR"Upqqrkpi→Ownvkecuv"XNCP"page.
5 Check Multicast VLAN 5/7" and Ownvkecuv" XNCP" 5 will be displayed in the IGMP
Snooping Status table on the Ownvkecuv→KIOR"
Upqqrkpi→Upqqrkpi"Eqphki"page.
148
To Next Page
Loading...
