EasyManua.ls Logo

TP-Link TL-SL5428E - Page 163

TP-Link TL-SL5428E
307 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Gttqt"Rcemg
v<"
Displays the number of error packets the port received.
32030:" Swgtkgt"Eqphki"
In an IPv4 multicast network that runs IGMP, a Layer 3 multicast device works as an IGMP querier
to send IGMP queries and manage the multicast table. But IGMP is not supported by the devices
in Layer 2 network. IGMP Snooping Querier can act as an IGMP Router in Layer 2 network. It can
help to create and maintain multicast forwarding table on the switch with the Query messages it
generates.
Choose the menu"Ownvkecuv→Swgtkgt to load the following page."
Figure 10-12
Packet Statistics
The following entries are displayed on this screen:
" KIOR"Upqqrkpi"Swgtkgt"Eqphki"
XNCP"KF<"
Enter the ID of the VLAN that enables IGMP Snooping Querier.
Swgt{"Kpvgtxcn<"
Enter the time interval of sending a general query frame by IGMP
Snooping Querier.
Ocz"Tgurqpug"
Vkog<"
Enter the maximal time for the host to respond to a general query
frame sent by IGMP Snooping Querier.
Igpgtcn"Swgt{"
Uqwteg"KR<"
Enter the source IP of the general query frame sent by IGMP
Snooping Querier. It should not be a multicast IP or a broadcast IP.
Ncuv"Ogodgt"Swgt{"
Kpvgtxcn<"
Enter the time interval of sending specific query frames by IGMP
Snooping Querier. A specific query will be sent on condition that
"fast-leave" is not enabled and a leave frame is received.
151

Table of Contents