Configuration Procedure of Voice VLAN:
Uvgr" Qrgtcvkqp" Fguetkrvkqp"
1 Configure the link type of
the port
Required. On XNCP→:2403S"XNCP→Rqtv"Eqphki"page,
configure the link type of ports of the voice device.
2 Create VLAN Required. On XNCP→:2403S"XNCP→Rqtv"Eqphki"page,
click the Etgcvg button to create a VLAN.
3 Add OUI address Optional. On SqU→Xqkeg"XNCP→QWK"Eqphki page, you
can check whether the switch is supporting the OUI
template or not. If not, please add the OUI address.
4 Configure the parameters
of the ports in voice VLAN.
Required. On SqU→Xqkeg" XNCP→Rqtv" Eqphki page,
configure the parameters of the ports in voice VLAN.
5 Enable Voice VLAN Required. On SqU→Xqkeg"XNCP→Inqdcn"Eqphki page,
configure the global parameters of voice VLAN.
Return to CONTENTS
180
To Next Page
Loading...
