XNC
P"Etgcvg1Fgngvg"
If selected, the switch will send a VLAN Create/Delete trap when a
VLAN is being created or deleted.
KR"Ejcpig<"
If selected, the switch will send an IP Change trap when the IP
address of the switch is changed.
Uvqto"Eqpvtqn<"
If selected, the switch will send a Storm Control trap when the
broadcast, multicast or UL rate exceeds the limit. You can
configure the limit on SqU→Dcpfykfvj" Eqpvtqn" →Uvqto"
Eqpvtqn"page.
Dcpfykfvj"Eqpvtqn<"
If selected, the switch will send a Bandwidth Control trap when the
traffic rate of a port exceeds the limit. You can configure the limit
on SqU→Dcpfykfvj"Eqpvtqn→Tcvg"nkokv"page.
NNFR<"
If selected, the switch will send an LLDP trap when the status o
LLDP changes.
OCE"Cfftguu "Vcdng<"
If selected, the switch will send a MAC Address Table trap when
the MAC address table has any changes.
Nqqrdcem"Fgvgevkqp<"
If selected, the switch will send a Loopback Detection trap when
the status of loopback detection changes.
Urcppkpi"Vtgg<"
If selected, the switch will send a Spanning Tree trap when the
status of STP on the port changes.
Rqtv"Ceeguu<"
If selected, the switch will send a Port Access trap when some
users try to log on to the web management page via ports
that have no authority. You can configure the access control policy
on U{uvgo→Ceeguu"Ugewtkv{→Ceeguu"Eqpvtqn"page.
KR/OCE"Dkpfkpi<"
If selected, the switch will send an IP-MAC Binding trap when it
receives a packet from the host that does not match the rules in
IP-MAC binding table. You can configure the IP-MAC Binding
policy on Pgvyqtm"Ugewtkv{→KR/OCE"Dkpfkpi"page.
KR"Fwrnkecvg<"
If selected, the switch will send an IP Duplicate trap when anothe
host uses the switch's IP address.
FJER"Hknvgt<"
If selected, the switch will send a DHCP Filter trap when it
receives a DHCP packet from an untrusted port.
" Rqtv"Vtcru"
Rqtv"Ugngev<"
Click the Ugngev" button to quick-select the corresponding port
based on the port number you entered.
Ugngev<"
Select your desired port for configuration. It is multi-optional.
Rqtv<"
Displays the port number.
Nkpm"Uvcvwu<"
Enable/Disable Link Status traps for the desired port.
Pqvg<"
To enable the Link Status traps for the desired port, please select the “Link Status” on the UPOR"
Vtcru"first, otherwise, it will not take effect.
246
To Next Page
Loading...
