The followin
g entries are displayed on this screen:
" Itcrjke"Ujqy"
Eqnngev"Vqrqnqi{<"
Click the Eqnngev"Vqrqnqi{ button to display the cluster topology.
Ocpcig<"
If the current device is the commander switch in the cluster and
the selected device is a member switch in the cluster, you can
click the Ocpcig button to log on to Web management page of
the corresponding switch.
Global configuration procedure of the Cluster function:
Before configuring a cluster, you should make clear the role each device will play in the cluster in
advance and make sure the devices in the cluster can communicate with each other.
If the switch is a commander switch in the cluster, please take the following steps.
Uvgr" Qrgtcvkqp" Fguetkrvkqp"
1 Enable the NDP function globally
and for the port, and then
configure NDP parameters
Optional. On Enwuvgt→PFR→PFR" Eqphki" page,
enable the NDP function on the switch.
2 Enable the NTDP function globally
and for the port, and then
configure NTDP parameters
Optional. On Enwuvgt→PVFR→PVFR" Eqphki" page,
enable the NTDP function on the switch.
3 Establish a cluster and configure
the related parameters
Optional. On Enwuvgt→Enwuvgt→Enwuvgt" Eqphki"
page, establish a cluster and configure the related
parameters.
4 Manage the device in the cluster Optional. On Enwuvgt→Enwuvgt→Ogodgt" Eqphki"
page, select the desired member switches and click
the Ocpcig"button to log on to its Web management
page for configuration.
Or
On Enwuvgt→Enwuvgt→Enwuvgt" Vqrqnqi{" page,
double- click the icon of the switch to view its detailed
information; click the icon, and then click the Ocpcig"
button to log on to its Web management page for
configuration.
If the switch is a member switch in the cluster, please take the following steps.
Uvgr" Qrgtcvkqp" Fguetkrvkqp"
1 Enable the NDP function globally
and for the port, and then
configure NDP parameters
Optional. On Enwuvgt→PFR→PFR" Eqphki" page,
enable the NDP function on the switch.
2 Enable the NTDP function globally
and for the port, and then
configure NTDP parameters
Optional. On Enwuvgt→PVFR→PVFR" Eqphki" page,
enable the NTDP function on the switch.
278
To Next Page
Loading...
