Uvcvwu<"
Displays the st
atus of the link-local address.
Pqtocn< Indicates that the link-local address is normal.
Vt{< Indicates that the link-local address may be newly
configured
Tgrgcv< Indicates that the link-local address is duplicate. It is
illegal to access the switch using the IPv6 address (including
link-local and global address).
" Inqdcn"Cfftguu"Cwvqeqphki"xkc"TC"Oguucig"
Gpcdng"inqdc n"cfftguu "
cwvq" eqphkiwtcvkqp" xkc"
TC "oguucig<"
When this option is enabled, the switch automatically configures a
global address and other information according to the address
prefix and other configuration parameters from the received RA
(Router Advertisement) message.
" Inqdcn"Cfftguu"Cwvqeqphki"xkc"FJERx8"Ugtxgt"
Gpcdng" Inqdcn"
Cfftguu" Cwvqeqphki"
xkc"FJERx8"Ugtxgt<"
When this option is enabled, the system will try to obtain the global
address from the DHCPv6 Server.
" Cff"c"inqdcn"cfftguu"ocpwcnn{"
Cfftguu"Hqtocv<"
You can select the global address format according to your
requirements.
GWK/86< Indicates that you only need to specify an address
prefix, and then the system will create a global address
automatically.
Pqv"GWK/86<"Indicates that you have to specify an intact global
address.
Inqdcn"Cfftguu<"
When selecting the mode of EUI-64, please input the address
prefix here, otherwise, please input an intact IPv6 address here.
" Inqdcn"cfftguu"Vcdng"
Ugngev<"
Select the desired entry to delete or modify the corresponding
global address.
Inqdcn"Cfftguu<"
Modify the global address.
Rtghkz"Ngpivj<"
Modify the prefix length of the global address.
V{rg<"
Displays the configuration mode of the global address.
Ocpwcn< Indicates that the corresponding address is
configured manually
Cwvq< Indicates that the corresponding address is created
automatically using the RA message or obtained from the
DHCPv6 Server.
Rtghgttgf" Nkhgvkog"
1Xcnkf"Nkhgvkog<"
Displays the preferred time and valid time of the global address.
24
To Next Page
Loading...
