Mg{
"Hkng<"
Select the desired key file to download.
Fqypnqcf<"
Click the" Fqypnqcf button to down the desired key file to the
switch.
Pqvg<"
1. Please ensure the key length of the downloaded file is in the range of 256 to 3072 bits.
2. After the Key File is downloaded, the user’s original key of the same type will be replaced.
The wrong uploaded file will result in the SSH access to the switch via Password
authentication.
Crrnkecvkqp"Gzcorng"3"hqt"UUJ<"
" Pgvyqtm"Tgswktgogpvu"
1. Log on to the switch via password authentication using SSH and the SSH function is enabled
on the switch.
2. PuTTY client software is recommended.
" Eqphkiwtcvkqp"Rtqegfwtg"
1. Open the software to log on to the interface of PuTTY. Enter the IP address of the switch into
Jquv"Pcog field; keep the default value 22 in the Rqtv field; select UUJ as the Connection
type.
2. Click the Qrgp button in the above figure to log on to the switch. Enter the login user name and
password, and then you can continue to configure the switch.
34
To Next Page
Loading...
