T
o ensure the normal communication of the factory switch, the default VLAN of all ports is set to
VLAN1.
The following entries are displayed on this screen:
" XNCP"Vcdng"
XNCP"KF"Ugngev："
Click the Ugngev" button to quick-select the corresponding entry
based on the VLAN ID number you entered.
Ugngev："
Select the desired entry to delete the corresponding VLAN. It is
multi-optional.
XNCP"KF："
Displays the ID number of VLAN.
Pcog："
Displays the user-defined name of VLAN.
Ogodgtu："
Displays the port members in the VLAN.
Qrgtcvkqp："
Allows you to view or modify the information for each entry.
Gfkv<"Click to modify the settings of VLAN.
Fgvckn< Click to get the information of VLAN.
Click Gfkv"button to modify the settings of the corresponding VLAN. Click Etgcvg button to create a
new VLAN.
Figure 6-4 Create or Modify 802.1Q VLAN
62
To Next Page
Loading...
