Basic safety instructions
TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany
Page 70 of 108 TR - ECE - BA - DGB - 0070 - 17 12/13/2018
2.6 Usage in explosive atmospheres
When used in explosive atmospheres, the standard measuring system has to be
installed in an appropriate explosion protective enclosure and subject to requirements.
The products are labeled with an additional marking on the nameplate:
Explosion protection enclosure
marking User Manual
ADV75
Gas: II 3G Ex
TR-ECE-BA-GB-0133
The “intended use” as well as any information on the safe usage of the ATEX-
compliant measuring system in explosive atmospheres are contained in the User
Manual.
Standard measuring systems that are installed in the explosion protection enclosure
and are intended for use with safety instrumented applications can therefore be used
in explosive atmospheres.
When the measuring system is installed in the explosion protection enclosure, which
means that it meets explosion protection requirements, the properties of the
measuring system will no longer be as they were originally.
Following the specifications in the User Manual, please check whether the
properties defined in that manual meet the application-specific requirements.
Fail-safe usage requires additional measures and requirements. Such measures and
requirements must be determined prior to initial commissioning and must be taken and
met accordingly.
To Next Page
Loading...
