Basic safety instructions
TR-Electronic GmbH 2009, All Rights Reserved Printed in the Federal Republic of Germany
Page 76 of 108 TR - ECE - BA - DGB - 0070 - 17 12/13/2018
● The measuring system contains components and assemblies susceptible
to electrical discharge, which can be destroyed if incorrectly handled.
– Touching the measuring system connection contacts with the fingers must
be avoided or the relevant ESD protective measures must be applied.
● Disposal
– If disposal has to be undertaken after the lifespan of the device, the
respective applicable country-specific regulations are to be observed.
To Next Page
Loading...
