Trace Engineering PS Series

CONTROLS, INDICATORS AND COMPONENTS
Copyright  Trace Engineering Company, Inc.
5916 - 195th Street N.E.
Arlington, WA 98223
Telephone: 360/435-8826
Fax: 360/435-2229
www.traceengineering.com
PS Series Inverter/Charger
Part No. 3597
Rev. D: November 23, 1999
Page
7
UNIT IDENTIFICATION
This section describes the marking and location of the model and serial number for the PS Series
Inverter/Chargers. Use this section to determine the type and model of your inverter/charger. The unit
Identification Label on the left side panel of the inverter/charger will show the model number, serial
number, DC charging current (maximum and default setting), AC voltage and frequency, configuration,
and date of manufacture.
Note: Ensure you have entered your serial number and model number on page 5 for future reference.
Figure 1, Identification Label
DC Input Voltage
Operating Range
Model Number
DC Charging Amps
Configuration
Product Code
and Serial Number
Quarter and Year of
Manufacture
Certification Label