Issue 1.3 September 2007
18
Caller ID Features
Description: The Caller ID feature on the TD-824i system allows you
to identify incoming callers before you answer the call.
This feature is available only to digital telephone sets
equipped with an LCD display.
While your telephone set is ringing with an incoming call:
1. Your LCD will display: TK: XX
TransTel
Note: Caller ID information will appear on your LCD with incoming
calls, held calls, transferred calls, and recalls back to your
station. You will also ger Caller ID information if you are
talking on an outside line and another calls rings in to your
telephone set. Your telephone may be programmed to display
number, name or name and number.
To review Caller ID records:
1. Press the lit Caller ID key on your telephone set.
Press [VOL ↑
↑↑
↑] or [VOL ↓
↓↓
↓] to scroll back and forth through the records.
To view Date and Time:
1. While reviewing a record you may also view the date and time by
pressing the [MIC] key.
Redial Caller ID Number:
1. Press the [REDIAL] key. The system will place the call for you
automatically. The current Caller ID record will be dialed back.
Delete Caller ID Record:
1. While reviewing a Caller ID record, you may delete it by pressing
the [TRF/FL] key.
To exit Caller ID Review Mode:
1. Press the [SPK] key.
NOTE: DK2 users have added capability. See “Softkeys” in this
document.
To Next Page
Loading...