41
Description: Central Office (CO) lines can be directly selected by a
station user.
Types: DSS key selection.
Access Code Selection.
DSS Key Selection:
1. Press a Central Office Line button. If access is allowed, you will
receive Central Office Dial tone.
2. You may dial a call over the connected line.
Access Code Selection:
1. Dial [8], plus the line number (between 01 and xx. If access is
allowed you will receive Central Office Dial tone.
2. You may dial a call over the connected line.
Individual Line Access
ISDN & LCR Dialing
Description: When making an outgoing call using Least Cost
Routing or an ISDN Primary Rate Interface, the
system will collect all the digits you dial and then
access an appropriate line to place the call. It is
somewhat different than traditional lines when you
place a call and the digits are sent while you dial them.
To place an outside call;
1. Dial 9 or press a line key on your telephone. LCR Predial will be
displayed on your telephone. You will hear an internal dial tone
from the system
2. Dial your desired telephone number.
3. The system will access a line automatically and process the call
for you.
To Next Page
Loading...