29
Description: Depending on system programming, you may have
the ability to monitor another station's conversation.
The station(s) being monitored will receive no
notification of the monitor.
1. You call another station. It is busy.
2. Press [#]. If you are authorized, you will be allowed in to the
conversation. The microphone on your telephone handset or
Speakerphone is muted. You will be able to listen to the
conversation, without a talk path into the conversation. No
notification is given to the station you are monitoring.
3. Your telephone, if equipped with LCD, will show both parties that
are involved in the conversation that you are monitoring.
4. At any time you may exit the monitor function by replacing the
handset or pressing the [SPK] button.
Note: Monitor capability is assigned by Class of Service Level in
system programming. You may monitor any station with a
lower number than your telephone set. It is for this reason
that you may be able to monitor some stations, and not
others. Not all stations may have the ability to monitor.
Conversation Monitor
Date and Time Setting (Operator Function)
Description: While the system clock is highly accurate, it may be
desirable at certain times to set the date and time on
the system. Any station that is defined as a system
console (operator) may set the time as per the
directions below.
1. Press [PRG], [HOLD],[7]
2. LCD will display: System Date/Time
mm dd yy hh mm D
Where mm-dd-yy is month (01-12) - day (01-31) - year (00-99) and
hh:mm is hour (00-24) : minute (00-59) and D is Day of Week
Day of Week: 1=Monday, 2=Tuesday, 3=Wednesday,
4=Thursday, 5=Friday, 6=Saturday, 7=Sunday
3. Enter the information for all fields and press [SAVE] .
4. Your LCD will update with the next use of your phone.
Note: If you are not defined as a system console, the above
procedures will allow you to set a Wake Up or Station
Reminder for your own station.
To Next Page
Loading...