EasyManua.ls Logo

TransTel Communications DK2 - To confer with members privately in a conference call

Default Icon
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Issue 1.3 September 2007
28
2. You will be connected to this line and removed from the
conference. Other parties will continue in the conference.
3. Disconnect the desired party by hanging up.
4. To return to the original conference, lift the handset or press
speaker followed by [DND/CN].
To confer with members privately in a conference call:
For a 3 party conference (i.e yourself and 2 CO lines):
1. During the conference, press the CO line you wish to confer with.
The other party goes on hold.
2. To alternate to the other party, press hold followed by the
apropriate CO line key.
3. To re-establish the conference, simply press the [DND/CN] key.
For conferences with 4 parties or more (including yourself):
1. During the conference, press the CO line you wish to confer with.
The other parties will continue in conference.
2. You may alternate freely and privately between conference
members by pressing their associated CO line or station key.
3. To rejoin the conference, simply press the [DND/CN] key.
NOTE: 1. In order to provide the capability to extend time on the
unsupervised conference, the GDS system must be
equipped with Voice Mail Unit (VMU) interface card.
The unsupervised conference period is programmable from 1
minute to 9 minutes in one minute increments.
2. If a VMU card is not installed conference members may
speak for as long as they like and the system will recog-
nize disconnect supervision so long as it is provided by
your operating telephone company. If available, calls will
be terminated when members hang up.
Conference (Continued)

Related product manuals