25
Description: Camp-On provides the ability to transfer a call to a
station that is on another call. It provides audible
notification and will provide visual indication of the
camping caller on sets equipped with LCD display .
Camping a Call To a Busy Station:
1. You are in a conversation with a party on an outside line.
2. Press [HOLD] or the DSS of the station you want to transfer to, or
Dial the station where you wish to transfer the call. It returns busy
tone.
4. Press [TRF/FL]. The outside call is camped-on to the busy
station.
Note: If the camped station does not answer the call within a pre-
programmed time (under system software control) the
camped on caller will re-ring your telephone set.
Answer a Call That Is Camped-On To Your Station:
Camp-On (Call Waiting)
External Call Forwarding
Note: External Call Forwarding works ONLY with Call Forward ALL
Calls.
1. Set up a personal speed dial number under one of your DSS keys
by Pressing [PRG], [SPD], [8] and selecting one of the DSS keys
1 through 22 on your telephone set. Enter the outside number
where you want to forward your calls.
Press [SAVE]. Set Ring Frequency is displayed. This is for use
with the caller id feature of the system.
If you want this number when it rings your telephone to have a
unique frequency, enter that frequency now 1 - 8. Otherwise,
Press [SAVE]. Press [SPK]. Your external number has been
saved.
2. To activate. Press [PRG], [FWD], [1], DSS key where you stored
the outside number.
Your Call Forward key will flash indicating the feature and
forwarding is active. You may toggle the feature on and off by
pressing the FWD key.
Call Forwarding (Continued)
To Next Page
Loading...