Issue 1.3 September 2007
34
Flash
Description: Flash provides a timed temporary disconnection while
on a CO line. Depending on your particular
installation, the Flash will be programmed for either
Centrex/PABX operation or CO disconnect operation.
Only one will apply to your system.
Types: Centrex/PABX Flash.
CO disconnect operation.
Centrex/PABX Flash
1. Flash only operates while you are connected to an outside line.
2. While on an outside call press [TRF/FL].
3. You will hear Centrex or PABX "Special" or "Transfer" dial tone.
4. You may now transfer the call as per the directions for your
Centrex or PABX system.
CO Disconnect Operation
1. Flash only operates while you are connected to an outside line.
2. While on an outside call press [TRF/FL].
3. You will be disconnected from the previous call.
4. You will then be connected to Central Office dial tone and allowed
to make another telephone call.
To Next Page
Loading...