Issue 1.3 September 2007
36
Handsfree Operation
Description: All TransTel Digital Telephone sets may be used in the
Handsfree mode for On Hook Dialing and receiving
calls handsfree. Models DK1-D and DK1-S offer
conversation "Hands Free" on both internal and outside
calls. The DK1-B offers handsfree conversations on
intercom calls only.
Placing Intercom Calls:
1. Dial the station number that you wish to reach or press the
station's [DSS] button.
2. Your station will automatically enter the handsfree speakerphone
mode. You will be able to hear call progress tones through the
telephone speaker.
3a. If the party answers, you may lift the handset to begin the
conversation.
3b. You may begin the conversation or lift the handset and begin the
conversation.
Handsfree Dialing (External):
1. Press a [CO] line button or dial [9]. The [SPK] follwed by the
[MIC] button will light and you will be connected to an outside line.
2. Dial the number that you wish to reach. You will hear all call
progress over the telephone's internal speaker.
3a. If the party answers, you may lift the handset to begin the
conversation.
3b. If you have a speakerphone, you may talk handsfree.
Alternating Between Handset and Handsfree:
1. While in the Handsfree mode, you may lift the handset to change
to the handset mode of operation.
2. While in the handset mode, you may change to the handsfree
mode by pressing [SPK]. This will allow you to hang up the
handset and utilize the built in speaker in the system.
3. These steps may be repeated as many times as you like.
Note: All speed dial functions, including Dial by Name may be
accessed in the Handsfree mode. For more information, see
System Speed Dialing, Personal Speed Dialing, and Dial by
Name in this document.
To Next Page
Loading...