Issue 1.3 September 2007
46
Saved Number Redial
Description: Saved Number Redial allows you to save a telephone
number for use at a later time. This feature is in
addition to Last Number Redial.
Automatic Save:
1. You have dialed an outside call. The number does not answer or
is busy.
2. Press [SAVE].
3. The lower portion of the LCD (on display telephones) will display:
Auto Save
4. You may hang up.
5. Make other calls if you wish.
6. While your telephone is idle, press [SAVE].
7. The telephone will access an available line, turn on your speaker
and redial the saved number.
8. If you take no action, the system will monitor the call for a
programmable period of time and then disconnect the call and
return your telephone to idle.
9. The telephone set will periodically access a CO line and continue
to redial the saved number. Steps 7 and 8 will continue for a
programmed number of times or until you lift the handset or press
[SPK] while the system is on the line or until you make another
call.
Note: If you lift the handset or press [SPK] immediately before step
6 above, the system will dial the number without the
automatic redial functions taking effect.
To Next Page
Loading...
