35
Forced Account Code
Description: Forced Account Codes provide the means to secure
telephones from toll abuse. A restricted station may
enter a forced account code and make a call free of
toll control.
1. Telephone set should be idle (on hook, speaker off).
2. Press [PRG], [4].
3. Enter your forced account code.
4. If the account code is accepted, the system will selct an outside
line for you and allow you to dial the call.
Note: There are 600 total account codes available in the system.
Account codes are assigned in System Program 17. In
Program 40, stations can be assigned to a specific account
code whereby ONLY entry of this assigned account code will
permit outside dialing unrestricted. Also, stations can be
granted permission to use ANY of the assigned account
codes.
To Next Page
Loading...
