19
Call Park
Description: Call Park allows you to place calls into a hel “orbit” for
retrieval by other station users. There are 10 park or-
bits in the system.
1. To place a call into an orbit slot, while on an outside call, press
the [Call Park] key or press [Hold] and dial [85].
2. If you have an LCD phone the call will auto park and the orbit slot
number will be displayed.
3. From speaker and basic telephones press the [Call Park] key or
dial the access code [85] after placing the call on hold. You will
hear a confirmation tone. Enter the orbit number you wish to park
the call in. A second tone indicates the call was parked success-
fully.
4. If you hear a busy tone, the orbit is not available. Simply enter
the next numeric orbit number until you hear a confirmation tone
indication the call was successfully parked.
5. You may announce through paging or the intercom the orbit num-
ber on which the call was parked.
6. To retrieve a call parked in an orbit, press the [Call Park] key dial
the orbit number or dial [85] plus the orbit number.
To Next Page
Loading...