Issue 1.3 September 2007
20
Call Pickup
Description: Call Pickup lets you answer a call that is ringing at
another telephone. Call Pickup can be accomplished
by dialing an access code or by pressing a
programmed pick up key on your telephone set.
Call Pickup Types: Station Group Pickup
Individual Station Pickup
Departmental Pickup
All Pickup
Station Group Pickup
To answer a call that is ringing within a specific station group:
1. Press [Group Call Pickup] key or press [* 8].
2. LCD Display (if equipped) will show:
Pick Up _
3. Enter the group number that you wish to pick up (1-8).
4. You will be connected to the call ringing at a station in the
selected group. If more than one telephone within the group is
ringing, you will be connected to the oldest call in the group. If
there is not a call ringing in the group, you will hear busy tone.
Individual Station Pickup
To answer a specific ringing station:
1. Press [*].
2. LCD Display (if equipped) will show: Pick Up _
3. Enter the station number that you wish to pick up. If the station is
ringing, you will be connected to the caller that is ringing the
station. If the station is idle, you will receive busy tone.
Departmental Pickup
Departmental Pickup allows you to answer a call ringing at another
station within your own station group.
1. Press [Your Group Pickup] key or press [*].
2. LCD Display (if equipped) will show: Pick Up _
3. Press [0]. You will answer the call that was ringing within
your pickup group. If no station was ringing in your group, you will
hear a busy tone.
All Pickup
To Next Page
Loading...