TransTel Communications DK2 - System Speed Dialing; Dial By Name (Directory) Access

51
System Speed Dialing
Description: System Speed Dialing allows telephone numbers to
be stored in the system and made available for use
by all stations. All stations may have access to
system speed dial. A station's toll classification may
govern the actual ability to dial system speed dial
numbers.
Note: The actual number of speed dial numbers in the system is
dependant upon the system mix of personal speed dial
numbers and whether the system is programmed for a
system directory.
Types: Dial by Name (Directory) Access
Numeric (Bin) Access
Dial By Name (Directory) Access
Note: Dial By Name is only available to stations equipped with LCD
Displays. [DIR] must be programmed on the system in order
to utilize the Directory Function.
1. Press [DIR] button.
2. Press [2].
Display Shows: ENTER LETTER
3. Press the button containing the first letter of the desired speed
dial name. Continue to press the number until the desired letter
appears in the lower left corner of the display.
When the desired letter is shown in the display, press [VOL↑
↑↑
↑].
4. The display will show the first name that matches. If that is not
the name desired, press [VOL↑
↑↑
↑] again until the display shows the
Key 1= Q Z (Blank Space) 1 Key 2=A B C 2
Key 3=D E F 3 Key 4=G H I 4
Key 5=J K L 5 Key 6=M N O 6
Key 7=P R S 7 Key 8=T U V 8
Key 9=W X Y 9 Key 0= . : & 0
Key *= - / ! * Key #=( ) $ #