Issue 1.3 September 2007
52
proper name. If the end of the list is reached, the system will
begin again at the first name in the list.
7. If there is no match, the display will show:
NO ENTRIES
TRY AGAIN.
You may return to step 5 above and continue with a valid entry or
lift the handset and return to an idle state.
8. When the desired name is found, you may lift the handset or
press [SPK] and the call will be automatically placed.
Numeric (Bin) Access
1. Press [SPD] button.
LCD will display: Speed Code
2. Enter three digit speed dial entry.
3 The speaker will activate and the number will be dialed.
4. You may speak handsfree if equipped with a speakerphone or lift
the handset when the other party answers.
Note: If your system is programmed for directory dialing for both
intercom and system speed dial your display will indicate:
1= Intercom
2= Speed Dial
If your system is programmed for directory dialing of speed dial only
your display will indicate;
Enter Letter
System Speed Dialing
(Continued)
To Next Page
Loading...
