TransTel Communications DK2 - Conference; Station Controlled Conference; Unsupervised Line Conference; Rejoining an unsupervised conference

27
Description: Conference allows you to create a conversation
between yourself and two or more parties. Up to 3
conferences of 5 members or a single conference
with up to 15 parties are permitted.
Types: Station Controlled Conference
Unsupervised Line Conference
Station Controlled Conference
To establish a conference:
1. Establish first telephone call (either CO or intercom call).
2. Press [HOLD]. The first caller is on system hold.
3. Establish second call (either CO or intercom call).
4. Press [DND/CN].
5. The first and second caller are now in conference with you.
6. Steps 2 through 5 may repeated to a maximum of fifteen other
parties in the conference.
Unsupervised Line Conference
1. You have established a conference via the station controlled
conference above.
2. The conference consists of two or more outside CO lines and no
other internal stations.
3. Press [DND/CN] and hang up the telephone.
4. Your station is returned to idle and the outside lines are
connected together. The outside line LED’s will be lit steady,
indicating they are still in conference.
Rejoining an unsupervised conference:
1. Lift the handset or press speaker.
2. Press [DND/CN]. You will be readmitted to the conference.
To exit and terminate a conference:
1. During the conference, simply hang up the telephone set. All
parties will be terminated.
To remove a party from a conference call:
1. During the conference, press the CO line of the party you would
like to remove.
Conference