21
All Pickup allows you to pick up the oldest ringing call in the system,
without regard for the station number or type of call.
2. Press [PICKUP ALL] key or press [*].
3. LCD Display (if equipped) will show: Pick Up _
4. Press [9].
You will answer the oldest call that was ringing anywhere within your
system. If no call was ringing, you will hear a busy tone.
(Continued) Call Pickup
Description: Call Split/Swap allows you to quickly alternate
between two different calls in the system.
Note: If your station does not have a pre-programmed [SPLIT/
SWAP] button you should substitute [SPD], [#] in its place.
1. Establish the first call (either intercom or external CO call).
2. Press [HOLD]. The first call is on Hold.
3. Establish the second call (either intercom or external CO call).
4. Press [SPLIT/SWAP]. The second caller is on Hold. You are
connected to the first caller.
5. You may continue to alternate between the two callers as many
times as you wish. Each time you wish to alternate, press
[SPLIT/SWAP].
Call Split/Swap
To Next Page
Loading...
