It is possible to get the list of services at IP out in the following
formats:
XSPF
M3U
Extended M3U
Extended++ M3U
XSPF
can be accessed by enter “/ipoutservices” after the URL for
the TDX configuration.
Sample
:
<?xml version="1.0" encoding="UTF-8"?>
<playlist version="1" xmlns="http://xspf.org/ns/0/">
<trackList>
<track><title>DR1</title><location>udp://@239.194.0.1:50172</location>
<extension
application="http://www.triax.com"><poolserviceid>4</poolserviceid></extension></track>
<track><title>Syd</title><location>udp://@239.194.0.2:50172</location>
<extension
application="http://www.triax.com"><poolserviceid>6</poolserviceid></extension></track>
</trackList>
</playlist>
M3U
can be accessed by enter “/orgChanlist.m3u” after the URL for
the TDX configuration.
This service list contains
IP adresses and port numbers
Sample:
udp://239.194.0.1:50172
udp://239.194.0.2:50172
Extended M3U
can be accessed by enter “/chanlist.m3u” after the
URL for the TDX configuration.
The service list is compliant to SAT>IP Protocol Specification
(ver. 1.2.2) and is defined as
“extended M3U channel list”
In the standard under appendix A2.1
This service list contains
IP adress and port number
Service name
LCN
Sample
:
#EXTM3U
#EXTINF:0,1. DR1
udp://239.194.0.1:50172
#EXTINF:0,3. Syd
udp://239.194.0.2:50172
Extended++ M3U
can be accessed by enter “/satip.m3u” after the
URL for the TDX configuration.
The service list is based at the Extended M3U with further
extensions.
The service list can be used for TV sets. Panasonic is one TV set
vendor that supports this service list as service discovery.
The list is used for communication between the TDX system
controller and the TDX EPG server.
This service list contains
IP adress and port number
Service name, transport stream ID, original network ID
LCN
Service type (1=TV, 2=Radio)
Sample
:
#EXTM3U
#EXTINF:0,1. DR1
udp://239.194.0.1:50172?stype=1&onid=43962&tsid=0&svcid=4
#EXTINF:0,3. Syd
udp://239.194.0.2:50172?stype=1&onid=43962&tsid=0&svcid=6
All above list will be downloaded: