Trimble 5700 - Page 208

Index
208 5700/5800 GPS Receiver User Guide
data files
5700 receiver 74, 76
deleting by formatting CompactFlash
card 54
transferring from CompactFlash
card 74
Data LED See Logging/Memory LED
data link, using a cellular modem 43, 132
data outputs, NMEA 182
data storage cards See CompactFlash cards
data transfer
transferring files 69–76
with serial connection 71
with USB connection 72
Data Transfer utility
deleting files on receiver with 76
transferring files with 73
data/power cable pinouts 104, 172, 173
Default application file 64, 94, 146, 166
default settings
1PPS time tags 95
5700 receiver 94
5800 receiver 166
antenna 96, 167
ASCII output 95, 167
ASCII time tags 95
baud rate 95, 167
binary output 95, 167
changing 147
CMR output 95
elevation mask 95, 167
logging rate 96
measurement rate 96
motion 95, 167
NMEA output 95, 167
overriding 146
Port 3 power output 95
position logging rate 96
reference position 96, 167
reference station 95, 167
resetting 140
RT17 output 95, 167
RTCM output 95
serial format 95, 167
SNR mask 95, 167
streamed output 95, 167
SV enabling 95, 167
Default.cfg 64, 94, 146, 166
deleting files
application files 49, 137
by formatting CompactFlash card 54
ephemeris file 49, 137
in the receiver 76
delimiters, NMEA
checksum 180
field separator 180
start of message 178
Device Control record, in application
file 63, 145
diameter, of pole 34
dimensions
5700 receiver 90
5800 receiver 162
direction, NMEA field format 180
disabling flow control 204
dual event marker input 18, 110
dual-frequency RTK engine 18, 122
E
editing application files 80, 152
electrical interference 28, 129
electronic interference 124
elevation mask
default 95, 167
enabling
1PPS output in real time 116
1PPS output with an application
file 117
event marker input in real time 110