Model 3440 5–5
Reviewing the Stat Test
To review the results of the last stat test, press ¢2² at the Stat
Test menu shown on page 5–3. The gauge displays the results of
the density stat test as shown above. Press ¢ENTER/START² to
view the results of the moisture stat test. Follow the prompts to
scroll through the results.
Printing the Stat Test
To print the results of the last stat test to a serial printer or
computer via the gauge’s 9-pin serial port, press ¢3² at the Stat
Test menu shown on page 5–3. The gauge prompts the operator
to connect the printer to the gauge.
Connect the serial cable to the printer or computer serial port.
Press ¢ENTER/START². The gauge prints or uploads the stat test
data and returns to the Stat Test menu.
NOTE
You can purchase a serial cable from Troxler; contact
your representative to order part number 113128.
To Next Page
Loading...
Need help?
General
