5–8
Reviewing the Drift Test
To review the results of the drift stat test, press ¢2² at the Drift
Test menu. The gauge displays the results of the density drift
test.
Press ¢ENTER/START² to view the results of the moisture drift
test. Follow the prompts to scroll through the results.
Printing the Drift Test
To print the results of the last drift test to a serial printer or
computer via the gauge’s 9-pin serial port, press ¢3² at the Drift
Test menu. The gauge prompts the operator to connect the
printer to the gauge.
Connect the serial cable to the printer or computer serial port.
Press ¢ENTER/START². The gauge prints or uploads the drift
test data and returns to the Drift Test menu.
NOTE
You can purchase a serial cable from Troxler; contact
your representative to order part number 113128.
To Next Page
Loading...
