Page 82 of 110 Pages
Repeat the action mentioned in temperature Purge
Time above.
13.4.2 Create Pulse
Pulse A Count
Choose and enter Pulse A Count
SET PARAMETER screen will be displayed
Set the required value, move to Set and press UP or
DOWN keys to confirm the parameter value.
In order to exit move the cursor to Exit and press UP
or DOWN keys
Pulse A Stay Time
Repeat the action mentioned in Pulse A Count above.
Pulse A Low Pressure
Repeat the action mentioned in Pulse A Count above.
Pulse A High Pressure
Repeat the action mentioned in Pulse A Count above.
Pulse B Count
Repeat the action mentioned in Pulse A Count above.
Pulse B Stay Time
Repeat the action mentioned in Pulse A Count above.
Pulse B Low Pressure
Repeat the action mentioned in Pulse A Count above.
Pulse B High Pressure
To Next Page
Loading...
