Page 83 of 110 Pages
Repeat the action mentioned in Pulse A Count above.
13.4.3 Keep Heat
Temperature 1 Stay
Typical display for Keep Heat subdirectory
Choose and enter Temperature 1 Stay.
SET PARAMETER screen will be displayed
Set the required value, move to Set and press UP or
DOWN keys to confirm the parameter value.
In order to exit move the cursor to Exit and press UP
or DOWN keys
Temperature 1 Stay Time
Repeat the action mentioned in temperature 1 Stay
above
13.4.4 Heating
Sterilization Temperature
Typical display for Sterilization Temperature subdirectory
Choose and enter Sterilization Temperature
SET PARAMETER screen will be displayed
To Next Page
Loading...
