Tuttnauer 3840 - Page 96

Page 94 of 110 Pages
13.6.4 Print Test
This subdirectory enables the operator to test the printer.
When pressing START/STOP key on the Printer Test item the
printer will print out the following print out:
The following screen will be displayed.
In order to exit this screen and return to MAINTENANCE
directory press START/STOP key.
Cycle errors:
None
Canceled By User
Door is open
Analog Input Error
I/O Card Failed
Power Down
Invalid Parameter Value
No Water
Heat Time Error
Vacuum Time Error
Pressure Time Error
Heat Time Error (Keep)
Heat Time Error
Low Pressure
High Pressure
Low Temp
High Temp
Time Error
Low Pressure (Cooling)
High Temp. (Cooling)
High Pressure (Exhaust)
High Pressure (Dry)
High Pressure (Ending)
Air Error
High Temp. (Ending)
Error Open Door
Error Close Door
Accessory Timeout