Leaving the ignition cum steering lock in ‘ON’ position
for a prolonged time will drain the battery when the
vehicle is not in use. Switch OFF and take the key out
when the vehicle is not in use. Always lock the
steering while parking for safety.
Never attempt to move the vehicle when the steering
is locked, you may lose balance.
Caution
Warning
Connected instrument cluster's background
illumination, position lamps, headlamp low beam, tail
lamp and number plate lamp glow automatically once
the ignition is turned 'ON' without activating any other
switch.
When the ignition switch is turned 'ON' the
connected instrument cluster performs self
diagnostic cycle. A message 'GEAR UP' followed by a
'Race flag', 'Welcome message', 'Ride mode name'
and 'Average speed details' will be displayed on the
cluster's display. Wait till the 'AVG. SPEED' details
appears on the display.
11
Note
HANDLE BAR LIFT SIDE
1. Info switch
Info switch ' ' is used to cancel an incoming call,
clear notification on cluster display, start / stop of LAP
in lap timer mode, accept / reject the nearest fuel
location suggestion.
2. Horn switch
Press the switch ( ) to blow horn. It is used to
attract the attention of other road users in case of
danger.
3. Turn signal lamp switch
When the turn signal switch is moved to left ' '
or right ' ', the corresponding turn signal lamps
flashes. To stop flashing, push the switch in.
4
5
6
1
2
3
17
KNOW YOUR TVS APACHE RTR 200 Fi4V
To Next Page
Loading...
Need help?
General
