11
HANDLE BAR RIGHT SIDE
1. Electric starter switch
Ensure the transmission is in neutral or else press the
clutch lever before engaging the electric starter
switch ' '.
2. Throttle grip
It controls the fuel-air mixture supplied to the engine,
which regulates the engine speed. Rotate the throttle
grip in counter-clockwise from its idle position to
increase the engine speed and vice-versa to reduce.
3. Adjustable front brake lever
It controls a hydraulic circuit (ABS) that operates the
front brake system. The front brake is applied by
pressing the front brake lever gently towards the grip.
The brake lamp glows on application of front brake.
4. Engine cut off switch
It is ' 'used to switch off the engine but to keep
other DC system active. The ignition circuit is
disabled, preventing the engine from being restarted.
To restart the engine, return the switch to the ' '
position.
Ensure to turn ON the engine cut-off switch before
starting the vehicle.
Release the electric starter switch immediately after
pressing.
Front brake lever can be set to your convenience.
Refer page no. 56
With the ignition switch ON and engine kill is turned
ON/ OFF, priming noise of fuel pump may be heard
which is absolutely normal.
Note
Note
Note
19
1
2
3
4
5
KNOW YOUR TVS APACHE RTR 200 Fi4V
To Next Page
Loading...
Need help?
General
