SELF - MAINTENANCE PROCEDURES
BATTERY
To ensure better performance and long life of battery,
you are requested to follow the steps given bellow:
1. Remove the cover frame R (refer page No. 55).
2. Check the battery voltage. If the voltage measured
is less than 12.4V, charge the battery using TVS
Motor Company Limited recommended battery
charger only at TVS Motor Company Authorised
Distributor or Dealers / Authorised Service
centers.
3. Apply petroleum gelly to the terminals to avoid
corrosion.
4. Do not add additional electrical accessories.
Never check the battery charge by shorting the terminals.
Always connect the positive terminal first (red wire) and
then negative (black wire) to avoid sparking.
The inversion of the battery wires can damage the battery
and the recharging system.
If the motorcycle is to remain unused for a long time (a
month or longer), it is advisable to disconnect the battery
cables or have the battery removed by skilled personnel.
MAINTENANCE
Caution
69
To Next Page
Loading...
Need help?
General
