REAR BRAKE PEDAL
The rear brake pedal operates a hydraulic circuit (ABS
circuit incase of Dual channel ABS) that operates the
rear brake system and it is located adjacent to the right
side foot rest. To control the speed of your vehicle
close the throttle completely, and gradually press the
brake pedal down wards.
Rear brake pedal position can be set to your
convenience. Contact your TVS Motor Company
Distributor or Dealers / Authorised Service Centers
for setting the brake pedal position.
Note
Independent use of rear or front brake reduces the
overall braking efficiency. In extreme conditions
braking with only rear or front brake may lock the
wheel which would result in skidding or toppling of
vehicle.
Braking performance is affected adversely with wet
surfaces, loose surfaces and overheating of brake
system due to unnecessary continuous application of
brakes. For safety, exercise extreme caution while
braking and also at turning. Do not accelerate while
turning.
Caution
21
KNOW YOUR TVS APACHE RTR 200 Fi4V
To Next Page
Loading...
Need help?
General
