If the pass key entered wrongly then the instrument
cluster displays the following message.
On connecting with the smart phone successfully, the
instrument cluster displays the user name which is
fetched from the smart phone as shown.
In Android and IOS smart phones, if the Bluetooth is
'ON', and if the app is already paired with the cluster,
when the user opens the app with the ignition turned
'ON', the app connects automatically with the cluster
once the user takes his phone to near by the vehicle.
(if the auto connect setting of your smart phone is
turned 'ON'). This feature can be disabled if required.
Auto connect will only work with the last paired
mobile phone.
If the application unfortunately stops due to
unfrossen circumstances. Close and reopen the
application and do the manual pairing for the first
time, then auto-pairing will happen subsequently.
For first time pairing, logout from the app, login again
with your login credential and press 'Connect' icon.
Note
Auto-pairing happens only if the application is locked
in the RAM in multitasking screen of the phone with
manufacturer's customised OS (Ex. : MI, Vivo etc.).
In case of Android phones with Android OS version
above 8.0 for App to work seamlessly, any battery
optimisation setting to be removed in the TVS
Connect app and GPS shall be allowed to run in
backround in high accuracy mode.
Even if your phone's Bluetooth is already paired to
other gadgets like smart watch, health band or
helmet, the auto-pairing works with your TVS Apache
RTR 200 Fi 4V motorcycle's connected instrument
cluster.
Note
40
KNOW YOUR TVS APACHE RTR 200 Fi4V
To Next Page
Loading...
Need help?
General
