1-14
This equipment meets the requirements of the following agencies.
UL (UL 864)
ULC (S527)
FM (Class No. 3010)
If the AutoPulse Z-10 is installed in accordance with either NFPA 12A or NFPA 2001, the system
must employ an additional mechanically-operated manual release mechanism.
The installer should be familiar with the relevant codes listed below, as well as any other
applicable local codes and standards, when installing a fire alarm system.
NFPA 11 Standard for Low-Expansion Foam and Combined Agent Systems
NFPA 11A Standard for Medium- and High-Expansion Foam Systems
NFPA 12 Standard for Carbon Dioxide Extinguishing Systems
NFPA 12A Standard on Halon 1301 Fire Extinguishing Systems
NFPA 13 Standard for Installation of Sprinkler Systems
NFPA 14 Standard for the Installation of Standpipe and Hose Systems
NFPA 15 Standard for Water Spray Fixed Systems for Fire Protection
NFPA 16 Standard for the Installation of Deluge Foam-Water Sprinkler and Foam-Water
Spray Systems
NFPA 16A Standard for the Installation of Closed-Head Foam-Water Sprinkler Systems
NFPA 17 Standard for Dry Chemical Extinguishing Systems
NFPA 17A Standard for Wet Chemical Extinguishing Systems
NFPA 25 Standard for Inspection, Testing, and Maintenance of Water-Based Fire
Protection Systems
NFPA 70 National Electric Code
NFPA 72 National Fire Alarm Code
NFPA 101 Life Safety Code
NFPA 750 Standard on Water Mist Fire Protection Systems
NFPA 2001 Standard on Clean Agent Fire Protection Systems
ULC S524 Standard for Installation of Fire Alarm Systems (Canadian Systems)
Specifications, Continued
Listings and
Approvals
Codes and
Standards
To Next Page
Loading...
