4-1
This chapter describes the field programming required to select one of the panel’s preprogrammed
applications and configure the options for the selected application.
Refer to the page number listed in this table for information on a specific topic.
Topic See Page #
Overview 4-2
Programming the Application Mode 4-6
Programming Relay Operation 4-8
Programming IDC Circuit Style 4-8
Programming the Automatic Release Timer 4-9
Programming the RAC Time Limit Cutout 4-10
Programming Manual Release Time Delay 4-12
Programming Abort Switch Operation 4-13
Programming Stage 1 Alarm NAC2 Coding 4-15
Programming NAC Operation 4-16
Programming Supervisory Operation 4-17
Programming Supervisory Operation 4-18
Saving and Making Changes 4-19
Chapter 4
Programming
Introduction
In this Chapter
To Next Page
Loading...
