Tyco F3200 - Page 137

Document No: LT0119 F3200 Operator's Manual
Network Systems
Issue 2.04 29 July 2002 Page 11-21
11.10.4.2 Operator Sequence - Network Zone Range
To isolate a range of network zones, from the base display, press:
The LCD will display the selected range of zones, i.e. zone n n n n n to zone m m m m m
inclusive, plus the options to isolate or de-isolate the range.
To isolate the range of zones, press:
To de-isolate the range of zones, press:
A prompt is then given to isolate or de-isolate...
Alarm Zones only, press:
Ancill Zones only (Ancillary Control Zones), press:
All Zones, press:
0