UniCarriers SRX Series - Page 92

90
GENERAL CARE AND MAINTENANCE
SIDE SHIFT (OPTION) (cont’d)
1. Shift to right.
2. Shift to left.
mAIN TERmS USED IN THIS SECTION
Shift: To move the forks or load to the right or the left.
Side Shift Stroke: The maximum distance the forks or load can travel
to the right or the left.
Shift Finger Bar: An oblong board on which the forks and the backrest
are mounted. This shift nger bar shifts (moves) to the right and left.
Attachment: Equipment or parts to be added or replaced with the
loading/unloading devices to perform a variety of loading and unloading.
SAFETY RULES AND PRACTICES
WARNING
!
!
• Do not make sudden and quick shifts with the forks loaded or
raised.
If you make sudden shifts with the forks loaded, there is a risk of a load
collapse. This can cause the forklift to become unstable and possibly
tip over.
WARNING
!
!
• Only operate the side shift when entering or placing a load to
correct position before lowering.
• Never operate side shift during travel.
• Never operate side shift during lifting or lowering.