91
SIDE SHIFT (OPTION) (cont’d)
SAFETY RULES AND PRACTICES (CONT'D)
WARNING
!
!
• Do not use the shift function to push or pull loads or pallets.
If you use the side shift to pull or push loads, the equipment can be
overstrained, resulting in a malfunction. In addition, there are risks of
damaging loads or injuring people. Never push or pull loads with the
side shift.
WARNING
!
!
• Do not shift when the forks are in contact with the oor or on
a table.
If you do so, it can result in a malfunction of the equipment or a load
collapse. Do not shift when the forks are in contact with the ground.
GENERAL CARE AND MAINTENANCE
WARNING
!
!
• Do not travel with unstable or unsecured loads.
• Do not travel with loads shifted to one side.
• When loads are shifted (off centered) they will be less stable.
This could cause the load to shift or fall off unit.
• It also could cause the forklift to become unstable and tip
over.
To Next Page
Loading...
