To Next Page
K
Katherine ColeSep 13, 2025
What to do if UniPOS Fire Alarms show 'removed device' fault?
- AAndrew BrooksSep 13, 2025
If your UniPOS Fire Alarms are showing a fault because a device was removed, install the device.
What to do if UniPOS Fire Alarms show 'removed device' fault?
If your UniPOS Fire Alarms are showing a fault because a device was removed, install the device.
General| Monitored inputs | 8 |
|---|---|
| Battery voltage | 24V DC |
| Display | LCD |
| Touch Screen | No |
| Processor | ARM Cortex-M3 |
| Operating Temperature | -10°C to +55°C |
| Operating System | Proprietary |
| Memory | 512KB Flash |
| Communication Interfaces | RS485, Ethernet, USB |
Outlines the process for device addressing and initialization procedures.
Details the various modes and sequences of operation for the panel.
Explains what happens when a fire condition is detected in a zone.
Details visual and audible indications during fire condition.
Explains keypad operations and controls during a fire condition.
Explains the causes and nature of fault conditions in the system.
Details visual and audible indications for various fault conditions.
Explains keypad operations and controls during a fault condition.
