SB80 Work Platform - European i
F
ORWARD
H
OW
TO
U
SE
T
HIS
M
ANUAL
This manual is divided into 6 sections. The section
number printed at the top corner of each page can be
used as a quick reference guide.
S
PECIAL
INFORMATION
NOTES: Give helpful information.
W
ORKSHOP
P
ROCEDURES
CAUTION:
Detailed descriptions of standard
workshop procedures, safety principles and
service operations are not included. Please
note that this manual does contain warnings
and cautions against some specific service
methods which could cause personal injury, or
could damage a machine or make it unsafe.
Please understand that these warnings cannot
cover all conceivable ways in which service,
whether or not recommended by UpRight, Inc.,
might be done, or of the possible hazardous
consequences of each conceivable way, nor
could UpRight Inc. investigate all such ways.
Anyone using service procedures or tools,
whether or not recommended by UpRight Inc.,
must satisfy themselves thoroughly that nei-
ther personal safety nor machine safety will be
jeopardized.
All information contained in this manual is based on
the latest product information available at the time of
printing. We reserve the right to make changes at
any time without notice. No part of this publication
may be reproduced, stored in retrieval system, or
transmitted, in any form by any means, electronic,
mechanical, photocopying, recording, or otherwise,
without the prior written permission of the publisher.
This includes text, figures and table.
DANGER
!
!
Indicates the hazard or unsafe practice will
result in severe injury or death.
WARNING
!
!
Indicates the hazard or unsafe practice could
result in severe injury or death.
CAUTION
!!
Indicates the hazard or unsafe practice could
result in minor injury or property damage
Introduction &
Specifications
General description and machine specifications.
Machine Preparation &
Operation
Information on how to operate the work platform
and how to prepare it for operation.
Maintenance
Preventative maintenance and service
information.
Troubleshooting
Causes and solutions to typical problems.
Schematics
Schematics and valve block diagram with
description and location of components.
Illustrated Parts
Breakdown
Complete parts lists with illustrations.
To Next Page
Loading...
Need help?
General
