Vacon 100 - Page 149

Table 52: The technical data of the Vacon
®
100 HVAC AC drive
Technical item or function Technical data
Ambient conditions
Ambient operating tem-
perature
I
L
current: -10°C (no frost)…+40 °C
Up to 50 °C with derating (1.5%/1°C)
Storage temperature -40 °C…+70 °C
Relative humidity 0-95% R
H
, non-condensing, non-corrosive
Air quality:
•
chemical vapours
•
mechanical particles
Tested according to IEC 60068-2-60 Test Ke: Flowing
mixed gas corrosion test, Method 1 (H
2
S [hydrogen
sulfide] and SO
2
[sulfur dioxide])
Designed according to:
•
IEC 60721-3-3, unit in operation, class 3C2
•
IEC 60721-3-3, unit in operation, class 3S2
Altitude
100% nominal rating (no derating) up to 1000 m
1% derating for each 100m above 1000 m
Maximum altitudes:
•
208-240 V: 4000 m (TN and IT systems)
•
380-500 V: 4000 m (TN and IT systems)
•
380-500 V: 2000 m (corner-grounded network)
•
525-600 V: 2000 m (TN and IT systems, no corner
grounding)
Voltage for relay outputs:
•
Up to 3000 m : Allowed up to 240 V
•
3000 m-4000 m: Allowed up to 120 V
Corner grounding is allowed for MR4-MR6 (main volt-
age 208-230 V) up to 2000 m (see chapter 5.7 Installa-
tion in a corner-grounded network)
Ambient conditions
Vibration:
•
EN 61800-5-1
•
EN 60068-2-6
5-150 Hz
Displacement amplitude 1 mm (peak) at 5-15.8 Hz
(MR4-MR9)
Maximum acceleration amplitude 1 G at 15.8-150 Hz
(MR4-MR9)
Shock:
•
EN 60068-2-27
UPS Drop Test (for applicable UPS weights)
Storage and shipping: maximum 15 G, 11 ms (in pack-
age)
Enclosure class
IP21/UL Type 1: standard in entire kW/HP range
IP54/UL Type 12: option
NOTE!
For IP54/Type 12, a control panel adapter is neces-
sary.
TECHNICAL DATA, VACON® 100 HVAC VACON · 149
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
10