Vacon 100 - Page 40

G
F
A E
B
D
C
H
Fig. 19: The dimensions of the opening and drive outline with flange
A. The height of the opening for the flange
mounting
B. The width of the opening
C. The height of the drive
D. The width of the drive
E. The distance between the bottom of the
drive and the bottom of the opening
F. The outline of the opening
G. The outline of the drive
H. The top of the drive
Table 11: The dimensions of the drive, frames MR4 to MR9
Frame C [mm] D [mm] C [in] D [in]
MR4 357 152 14.1 6.0
MR5 454 169 17.9 6.7
MR6 580 220 22.8 8.7
MR7 680 286 26.8 11.3
MR8 898 359 35.4 14.1
MR9 1060 550 41.7 21.7
VACON · 40 MOUNTING
4
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205