Vacon 100 - Page 41

Table 12: The dimensions of the opening for the flange mounting, frames MR4 to MR9
Frame A [mm] B [mm] E [mm] A [in] B [in] E [in]
MR4 315 137 24 12.4 5.4 0.9
MR5 408 152 23 16.1 6.0 0.9
MR6 541 203 23 21.3 8.0 0.9
MR7 655 240 13 25.8 9.4 0.5
MR8 859 298 18 33.8 11.7 0.7
MR9 975 485 54 38.4 19.1 2.1
D
A
Fig. 20: Sealing of the opening for MR8 and MR9
A. The AC drive
B. The outline of the opening
C. Gasket tape
D. The top of the drive
MOUNTING VACON · 41
24-HOUR SUPPORT +358 (0)201 212 575 · EMAIL: VACON@VACON.COM
4