Vacon 100 Installation Manual

4.3 Dimensions for wall mounting, North America 31
4.3.1 Wall mounting of MR4, North America 31
4.3.2 Wall mounting of MR5, North America 32
4.3.3 Wall mounting of MR6, North America 33
4.3.4 Wall mounting of MR7, North America 34
4.3.5 Wall mounting of MR8, North America 35
4.3.6 Wall mounting of MR8, UL Open Type, North America 36
4.3.7 Wall mounting of MR9, North America 37
4.3.8 Wall mounting of MR9, UL Open Type, North America 38
4.4 Dimensions for flange mounting 38
4.4.1 Flange mounting of MR4 42
4.4.2 Flange mounting of MR5 43
4.4.3 Flange mounting of MR6 44
4.4.4 Flange mounting of MR7 45
4.4.5 Flange mounting of MR8 46
4.4.6 Flange mounting of MR9 47
4.5 Dimensions for flange mounting, North America 48
4.5.1 Flange mounting of MR4, North America 48
4.5.2 Flange mounting of MR5, North America 49
4.5.3 Flange mounting of MR6, North America 50
4.5.4 Flange mounting of MR7, North America 51
4.5.5 Flange mounting of MR8, North America 52
4.5.6 Flange mounting of MR9, North America 53
4.6 Cooling 54
5 Power cabling 57
5.1 Cable connections 57
5.2 UL standards on cabling 58
5.3 Cable dimensioning and selection 58
5.3.1 Cable and fuse sizes 58
5.3.2 Cable and fuse sizes, North America 63
5.4 Brake resistor cables 68
5.5 Preparing for the cable installation 69
5.6 Cable installation 69
5.6.1 Frames MR4 to MR7 69
5.6.2 Frames MR8 to MR9 76
5.7 Installation in a corner-grounded network 88
6 Control unit 89
6.1 Control unit components 89
6.2 Control unit cabling 90
6.2.1 Selection of the control cables 90
6.2.2 Control terminals and DIP switches 91
6.3 Fieldbus connection 95
6.3.1 Using fieldbus through an Ethernet cable 96
6.3.2 Using fieldbus through an RS485 cable 99
6.4 Installation of option boards 103
6.4.1 The installation procedure 104
VACON · 6 TABLE OF CONTENTS
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205

Vacon 100 Specifications

General

Product type	AC Drive
Enclosure class	IP20
EMC filter	Built-in
Power	0.25 kW - 5.5 kW
Cooling method	Fan
Braking chopper	Optional