Vacon X5 - Page 70

X5 AC Drive User’s Manual Chapter 6: Using Macro Mode / Quick Start
DPD00089A - 68 - © 2009 Vacon Incorporated All Rights Reserved
Table 6-6: Vector Application Macro (Core Factory Application from Table 6-1, plus the following
parameters)
Para. # Parameter Name Default See Page
501 V/Hz Select Vector 85
509 Rated Mtr Volt Model dependent 86
510 Rated Mtr FLA ND rating 86
511 Rated Mtr RPM 1750 rpm 86
514 Motor RS Model dependent 86
515 Power Factor 0.8 86
516 Slip Comp Enable No 87
519 Find Mtr Data Not Active 87
520 Filter FStator 8 mS 87
521 Start Field En No 87
522 Filter Time Slip 100 mS 88
523 Id Percent Read-only 88
524 Iq Percent Read-only 88
803 PWM Frequency 3.0 kHz 100
804 Display Mode Std Display 100